Differences

This shows you the differences between two versions of the page.

--- courses:phy101l:5 [2023/12/01 04:34] – [1. Introduction] asad
+++ courses:phy101l:5 [2023/12/07 05:46] (current) – [2. Method and data] asad
@@ Line 1: / Line 1: @@
-====== 5. Heat capacity of solids and liquids ======
+====== 5. Heat capacity of liquids ======
 [[https://colab.research.google.com/drive/1L5s2S6XH1c2YIyqN4_tE2pf-04aXXZJl?usp=sharing|Google Colab example]]
@@ Line 13: / Line 13: @@
 $$ c_k = \frac{m_w c_w \Delta T_w}{m_k \Delta T_k} $$
-which can be used to measure $c_k$. The given values of specific heat are
+which can be used to measure $c_k$. Define specific heat capacity using the unit J g$^{-1}$ K$^{-1}$.
-  * $c_w = 4.19$ J g$^{-1}$ K$^{-1}$
-  * $c_k = 2.40$ J g$^{-1}$ K$^{-1}$.
-Define specific heat capacity using the unit given above.
 Calculate the mass of water and kerosene given the volume $V$ and density $\rho$ using the relation
@@ Line 26: / Line 21: @@
 The volume is 100 ml where 1 ml = 1 cm$^3$. The densities of water ($\rho_w$) and kerosene (\rho_k) are given below.
-  * $\rho_w = 1$ g cm$^{-3}$,
+^ Material ^ Density [g cm$^{-3}$] ^ Specific heat capacity [J g$^{-1}$ K$^{-1}$] ^
-  * $\rho_k = 0.82$ g cm$^{-3}$.
+| Water | $1.00$ | $4.19$ |
+| Kerosene | $0.82$ | $2.40$ |
 ===== - Method and data =====
+==== - List of apparatus ====
+  - Beaker
+  - Thermometer
+  - Water, kerosene Oil
+  - Stopwatch
+  - Sprit Lamp
+  - Wire Gauze
+  - Tripod
+==== - Setup and procedure ====
+  - Ordered List Item 1
+  - Ordered List Item 2
+==== Data table ====
 ^ Time [min] ^ 100 ml Water ^ 100 ml Kerosene ^
 | 0 |  |  |
@@ Line 46: / Line 55: @@
 ===== - Graphical analysis =====
-===== - Heat capacity =====
+===== - Specific heat capacity =====
 ===== - Discussion and conclusion =====