In radio interferometry, multiple radio antennas or apertures (elements) are used for observation in order to increase angular resolution. Without interferometry, radio telescopes would have resolutions comparable to the size of the sun and the moon. Let us begin our discussion by understanding a standard two-element interferometer in one dimension.

Consider a simple source in the far field generating plane waves at a single frequency $\nu$, two identical antennas receiving only one polarization at $\nu$ without any distorting effects either along the intervening media or in the receiving system. The geometric configuration is shown below.

The baseline vector $\mathbf{b}$ between the phase centers of the antennas is written $\mathbf{b}_\lambda$ when expressed in terms of wavelength $\lambda$ (b_\lambda=b/\lambda). The unit vector $\mathbf{s}$ indicates the direction toward the source, and the projected baseline is perpendicular to it. The signal arrives at the reference antenna to the right first and then at the other antenna after a time delay $\tau_g$ related to the physical path length difference $\Delta l_g$ because

$$ \tau_g = \frac{\Delta l_g}{c} = \frac{b\sin\theta}{c} $$

in seconds, which is related to the number of cycles ($\Delta l_g/\lambda = b_\lambda\sin\theta$) and the phase difference

$$ \phi = 2\pi\nu\tau_g = 2\pi b_\lambda \sin\theta $$

which are all time-dependent because $\theta$ changes with time. The number of cycles is, effectively, the number of fringe spacings (the gap between interference fringes) per radian.

The signals from the two antennas are combined in the combiner: either added or multiplied.

The observation of a single point source by an adding interferometer, made of two antennas of diameter $D$ and spacing $d$, is shown in this polar diagram. An interference pattern with fringe spacing $\lambda/d$ is visible within a diffraction pattern of a single antenna having a width of $\sim \lambda/D$. The system noise is generated by the receiver itself. The receiver output created by the measured voltages from the two antennas $V_A$ and $V_B$ will be

$$ R_{A+B}(\tau_g) = \langle [V_A \cos\omega t + V_B\cos\omega(t-\tau_g) + V_r]^2 \rangle $$

where $\omega=2\pi\nu$ is the angular frequency, $V_r$ is the receiver noise, and $\langle\rangle$ denotes time-averaging. Expanding the right hand side, we get

$$ R_{A+B}(\tau_g) \approx \langle [V_A^2 \cos^2 \omega t + V_B^2 \cos^2 \omega(t-\tau_g) + 2 V_AV_B \cos\omega t \cos\omega(t-\tau_g) + V_r^2] \rangle $$

where the cross-terms between the signals and the receiver noise has been ignored because they do not have any long-term phase relationship. The third term on the right hand side can be written as \langle [\cos\omega\tau_g + \cos(2\omega t-\omega\tau_g)] \rangle using the relevant trigonometric identity ¹⁾.